ATMEL ATmega8L PDIP-28 Microcontroller from Atmega8A family is a high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB ISP flash memory, 1KB SRAM, 512B EEPROM, a 7-channel/10-bit A/D converter (TQFP and QFN/MLF), and debug WIRE for on-chip debugging. The device supports a throughput of 16 MIPS at 16 MHz and operates between 4.5-5.5 volts.

By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

Note:

Product Images are shown for illustrative purposes only and may differ from the actual product.

The available IC is ATmega8L.

Features:

• Advanced RISC Architecture.
• 32 x 8 General Purpose Working Registers.
• Fully Static Operation.
• Up to 16 MIPS Throughput at 16 MHz.
• On-chip 2-cycle Multiplier.
• High Endurance Non-volatile Memory segments.
• Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
• Optional Boot Code Section with Independent Lock Bits.
• In-System Programming by On-chip Boot Program.
• True Read-While-Write Operation.
• Programming Lock for Software Security.
• Extensive On-chip Debug Support.
• 8 Single-ended Channels.
• Byte-oriented Two-wire Serial Interface.
• Programmable Serial USART.
• Master/Slave SPI Serial Interface.
• Programmable Watchdog Timer with Separate On-chip Oscillator.
• Minimal circuit required for a complete functional project.
• Applications of ATmega8 Microcontroller:
• Multiple DIY projects.
• Projects requiring more than logical control for devices.
• Microcontroller applications for multiple device interface/Control.