Search
Search Criteria
Products meeting the search criteria
-21 %
SKU: RM000036
The 8key input keypad use to provide input to the controller devices. It has 8 tactile switches which provide input logic high or logic low. Keypad board have eight resistors to pull down the outputs of the switches to ground when the switch is not pressed. The eight pin male output connector connec..
₹ 79.00 ₹ 100.00
SKU: RM000570
The Jumbo chassis is a mechanical support to the robot for heavy load.Features of Jumbo Chassis:Length: 250 mm.Width: 130mm.Height: 60mm.High durable.High non-flexible.More strength.Lightweight.Has potential safety hazards.Can be re shape easily.Resistant to corrosion.Compression and depression.High..
₹ 120.00
SKU: RM001121
The micro mouse sensor having consists of 6 IR sensor for perfect angle rotation which is very easy of operating micro mouse robot.Features of Micro Mouse Sensor:Micro Mouse Sensor For Arduino/6 sensors for better positioning in maze.ADC output for for distance measurement.12 cm of range for each se..
₹ 150.00
SKU: RM000435
The Hall effect sensor is a transducer that varies its output voltage in response to a magnetic field.Features of Hall Effect Sensor:Such a switch costs less than a mechanical switch and is much more reliable.It can be operated up to 100 kHz.It does not suffer from contact bounce because a solid sta..
₹ 80.00
SKU: RM001314
A gear is a rotating machine part having cut teeth which mesh with another toothed part to transmit torque, in most cases with teeth on the one gear being of identical shape, and often also with that shape on the other gear. Geared devices can change the speed, torque, and direction of a power sourc..
₹ 30.00
SKU: RM001313
The multipurpose 13.8 cm Plastic Chassis Plate consists of an internal framework that supports a manmade object in its construction and use.Features of Multipurpose 13.8 Cm Chassis Plate:Easy to use.Easy to interface.Good Quality Material.Applications of Multipurpose 13.8 Cm Chassis Plate:It is used..
₹ 50.00
SKU: RM001312
A gear is a rotating machine part having cut teeth which mesh with another toothed part to transmit torque, in most cases with teeth on the one gear being of identical shape, and often also with that shape on the other gear. Geared devices can change the speed, torque, and direction of a power sourc..
₹ 49.00
SKU: RM000428
LM35 series Temperature Sensors is a precisely integrated circuit whose voltage output is linearly proportional to the centigrade temperature.Features of LM 35 Temperature Sensors :Calibrated Directly in Celsius (Centigrade).Linear + 10-mV/°C Scale Factor.0.5°C Ensured Accuracy (at 25°C).Rated for F..
₹ 65.00
SKU: RM001311
A wheel is a circular component that is intended to rotate on an axial bearing. The wheel is one of the main components of the wheel and axle which is one of the six simple machines. Wheels, in conjunction with axles, allow heavy objects to be moved easily facilitating movement or transportation whi..
₹ 30.00
SKU: RM000679
The AC adapter, AC/DC adapter or AC/DC converter is a type of external power supply, often enclosed in a case similar to an AC plug. Other names include plug pack, plug-in adapter, adapter block, domestic mains adapter, line power adapter, wall wart, or power adapter; adapters for battery-powered eq..
₹ 140.00
SKU: RM001309
Introducing our versatile Plastic Hook – the perfect organizational solution for your home or office! Say goodbye to clutter and tangled messes with this innovative and practical tool.Features of MechanzO Plastic Hook:Easy to use.Easy to interface.Long Life.Applications of MechanzO Plastic Hook:It i..
₹ 35.00
SKU: RM001308
A gear is a rotating machine part having cut teeth which mesh with another toothed part to transmit torque, in most cases with teeth on the one gear being of identical shape, and often also with that shape on the other gear. Geared devices can change the speed, torque, and direction of a power sourc..
₹ 69.00
SKU: RM000196
Servo Motors are optimum-quality and affordable cost servos.! They are suitable for a wide range of applications, including RC aircraft, automobiles, and robotics, Or just to have some fun with whatever crazy project you’re working on.When you purchase TowerPro motors in India, they are almost usual..
₹ 270.00
SKU: RM001307
L-Caster Wheel Clamp can be used to hold an object in a fixed position.Features of L Caster Wheel Clamp:Easy to use.Easy to interface.Good Quality Material.Applications of L Caster Wheel Clamp:It is used in Robotics.Note: Images shown is only for representation. The actual product may vary with the ..
₹ 30.00
-25 %
SKU: RM000440
What are Real-Time Clocks?Real-time clocks (RTC), as the name recommends are clock modules. The DS1307 real-time clock (RTC) IC is an 8 pin device using an I2C interface. The DS1307 is a low-power clock/calendar with 56 bytes of battery backup SRAM. The clock/calendar provides seconds, minutes, hour..
₹ 150.00 ₹ 199.00
SKU: RM000032
Dual H-Bridge Power Transistor Motor Driver Arduino Board is a simple motor driver used to drive high power dc motor which is both the combination of two NPN & PNP (TIP-122 & TIP-127) transistors to operate dual motor at a time in bidirectional.Features of Dual H-Bridge Power Transistor Moto..
₹ 349.00
SKU: RM003127
Specifications:Length: 23.5 cmWidth: 2.7 cmHeight: 1.5 cm..
₹ 60.00
SKU: RM001304
This multipurpose 13 cm L bar is used in different robotics purposes for different multiple design.Features of Multipurpose 13 CM L Bar:Easy to use.Easy to interface.Multiple holes for convenient fit.Applications of Multipurpose 13 CM L Bar:It is used in Robotics.Multiple DIY kits.Note: Images shown..
₹ 49.00
SKU: RM001302
Chain Links for tracked robotic platforms. Comes in pack of 50. Length can be customized by arranging number of links. Used with small and big size wheels for chain links. Each link is 3cm * 2cm. Hence total length of the chain link is about 1 meter.Features of Chain Links For Tracked Robot:Easy to ..
₹ 490.00
SKU: RM001084
ROBOMART makes a low-cost relay board shown above that contains both the relay and the required driver circuit built using a discrete transistor. The relay coils on this relay require around 6VDC. It is easier to drive relays like this that use a lower coil voltage. The relay can switch up to 220VAC..
₹ 130.00