Search

The DS-318 is a high-quality and dependable normal open push button switch SPST with 2 pins. It has a rating of 1A 250VAC and a contact resistance of 100mOhm max. It features OFF-ON function and an electrical life of >= 10,000 cycles. The switch has a dielectric strength of 500VAC 1 minute and an..

The KCD1-11 miniature rocker switch is a SPST switch with ON-OFF operation, designed for various electrical applications. It has a durable nylon 66 housing and button, with brass terminals that are silver plated. The switch is rated at 10A 125VAC/6A 250VAC and has a contact resistance of 35mOhm max...

A DIP switch is a manual electric switch that is packaged with others in a group in a standard dual in-line package (DIP) and can be used as 8-bit address switch.Features of 8 Ways DIP Switch / 8 Ways Slide SwitchSturdy built Quality.Easy to use.8 Bit address selection.Standard pin spacing for ..

A DIP switch is a manual electric switch that is packaged with others in a group in a standard dual in-line package (DIP) and can be used as4-bit address switchFeatures of DIP Switch (4 bit):Sturdy built Quality.Easy to use.4 Bit address selection.Standard pin spacing for use in PCB and also bread b..

The push to on switch is a switch which turns on when it is push and off when it is pulled. A push-button (also spelled pushbutton) or simply button is a simple switch mechanism for controlling some aspect of a machine or a processFeatures of Push ON OFF Switch:Heavy strong plastic material.350 degr..

Yellow 12x12x7.3mm Tactile 4 Pin Push Button Switch is fully compatible to Omron B3F-4055 Switch. It has 4 pins, 2 pins of each side are connected to each other. So, pressing the switch, connects all 4 pins. It has current capacity of 100 mA. The top of the switch is such that, cap can be easil..

S360-12 DC 0-12V 30A Regulated Switching Power Supply (110~220V)Specifications:Input Voltage: AC 110 - 220V Output Voltage: 0-12V D 30AOutput voltage: Adjustment Range: ±15% Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal AC input / F..

The TIP31 is a standard type of NPN bipolar junction transistor used for medium power applications. TIP31 transistors are designated as TIP31A, TIP31B, and TIP31 to indicate increasing collector-base and collector-emitter breakdown voltage ratings. The TIP31 is packaged in a TO-220 case.Features of ..

This tactile switch breakout module is available in robomart for versatile use.Features of Tactile Switch Breakout (12 MM):Easy to use.Easy to interface.Long life.Large switch.Applications of Tactile Switch Breakout(12 MM):It is used in Arduino/AVR/ARM/PIC/ projects.Note: Images shown is only for re..

This tactile switch breakout module is available in robomart for versatile use.Features of Tactile Switch Breakout:Easy to use.Easy to interface.Long life.Applications of Tactile Switch Breakout:It is used in Arduino/AVR/ARM/PIC/ projects.Note: Images shown is only for representation. The actual pro..

The TTP223B Digital Touch Sensor capacitive touch switch module for AVR, Arduino, ARM and other MCU. The module is based on a touch detection IC (TTP223B)\'s. Under normal conditions, the module output low, low-power mode to mode; touch of a finger when the corresponding position, the module will ou..

This toggle switch features single pole, solder lug and PC thru-hole terminations. Compact size-small footprint. Multi-position and various actuators for choice. This switch is perfect for Telecommunications, Instrumentation and Medical equipment.FeaturesWide variety of actuator and termination opti..

The TL2575 and TL2575HV greatly simplify the design of switching power supplies by conveniently providing all the active functions needed for a step-down (buck) switching regulator in an integrated circuit. Accepting a wide input voltage range of up to 60 V (HV version) and available in fixed output..

The push button SPST switch is used in home appliances, & Industrial purposes.Features of Push Button On/Off Switch:Good Quality material.Easily Replaceable.No maintenance.Applications of Push Button On/Off Switch:It is used in various applications in home appliances and industrial purposes.Mult..

A simple way to think of this switch is imagining 2 SPDT switches side by side with the 'handles' attached to each other. Perhaps the most popular use for this switch is 'phase or polarity reversal'. So, how does the DPDT switch accomplish this? First, you have to wire the 2 'top' and 2 'bottom' ter..

The TCRT5000 and TCRT5000L are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version.Features of TCRT5000 Reflective Infrared Optical Sensor Photoelectric Sw..

A Double Pole Double Throw toggle switch acts exactly like two separate SPDT switches connected to the same switch bat. It has two separate common terminals and each of those is connected to one or the other of the other two terminals on the same side of the switch.Features of DPDT Switch:Homopolyme..

The tactile switch, also called a momentary button or push-to-make switch, and is commonly used for input and microcontroller resets. This type of button creates a temporary electrical connection when pressed.Features of Tactile Switch 4 Pin:Size: 12mm.Ease of use.Long life.Applications of Tactile S..

The tactile switch, also called a momentary button or push-to-make switch, and is commonly used for input and microcontroller resets. This type of button creates a temporary electrical connection when pressed.Features of Tactile Switch 2 Pin:Size: 6mm.Ease of use.Long life.Applications of Tactile Sw..

LM25-23B24 Mornsun SMPS - 24V 1.1A - 25W AC/DC Enclosed Switching Single Output Power SupplyLM25-23B24 series is one of Mornsun’s enclosed AC-DC switching power supply. It features AC input and at the same time accepts DC input voltage, cost-effective, low no load power consumption, high e..